企业信息,成人丝袜射,日本中文字幕,初小videos第一次摘花

Description

CONTROLS have long tradition in manufacturing automatic setting time testers for cement and mortar. A new generation, the fourth one, is now available, featuring a large color 5.1” touch screen display. As with the older generations the test procedure is unchanged, a needle (or a probe) drops freely into a cement sample at regular intervals and in fixed positions. Penetration depth is measured by a sensor with 0,1 mm resolution. Along with hardening process development the penetration depth decreases, when it matches some thresholds pre-defined by Standards initial and final setting times are measured and recorded.
 

Technical Specifications

Technical specifications

• Conforming to EN 196-3, 13279-2, 480-2, ASTM  C191, C187

• 5.1”, 800 x 480 pixel, 16 M colors, icon-driven touchscreen graphic display, showing data and plots

• LAN port for direct connection to PC of a single unit or connection to a LAN hub for creating a network with up to 32 independent units all controlled by a single PC. 1 LAN cable is included

• USB port for test data download to PC and easy firmware upgrade

• Unlimited storage capacity for test data on internal 16 GB SD card

• Test procedures can be customized and stored to match user-defined requirements

• Can incorporate an integrated graphic printer showing test result and setting time plot

• Large test space with easy accessibility

• Automatic calculation of initial and final setting time at programmable penetration depth limits

• Wide range of accessories including EN and ASTM/AASHTO parts, in-water testing kit, needle cleaning device, integrated printer, probes for testing consistency and gypsum

• Minimum penetrations rate: 10 seconds

• Penetration measurement by encoder    

• Power: 50 W

• Dimensions: 200x400x410mm (L x W x H)

• Weight approx.: 10 kg

Firmware specifications

• Easy programming of customized test profiles, recallable for future tests, including:

• adjustable test start delay

• penetration points positions 

• manual or automatic penetration rate

• free or driven dropping mode

• holding intervals inside the sample

• automatic end- test detection

• automatic measurement of initial and final setting time     

• Test data: test number, operator, client, date, hour, cement type, water percentage, delay 

• Easy calibration menu         

• Clock calendar

• Multi-language