企业信息,成人丝袜射,日本中文字幕,初小videos第一次摘花

The ball type anemometer is a great tool to catch wind gust. The sampling rate is 1Hz which makes this device to be a proper supplement for DynaRoot or DynaTree users or any other cases when measuring wind gusts is essential.

The ball type anemometer can be used alone or on the top of one of our poles or as part of DynaRoot or DynaTree systems.

1. Assemble the anemometer in the vicinity of the     tree(s) to be assessed.

2. If you are using a pole attach the anemometer on the     top, and erect the tower. Wind velocity readings are sent to, and data is     collected at the data logger located at the bottom of the tower.

3. Start recording data by pressing the START button     located in the data logger.

1. After the recordings are finished, transfer the     acquired data to a PC by removing the internal SD card or by switching the     instruments to Wi-Fi mode.