企业信息,成人丝袜射,日本中文字幕,初小videos第一次摘花

- Speeds up registering irregular trunk shapes

 -Quickly measure distance in millimetres

 -Ranges are 1100 mm and 1999 mm

 -Transfers the value to PC via Bluetooth

- Integrated into both ArborSonic 3D and ArborElectro softwares

1. Insert the two arms of the caliper into the slots on     the main part.

2. Calibrate the caliper （see the user's     manual for more details）.

3. Start the ArborSonic     3D software or application and go to the Geometry page     or start the ArborElectro software and go to Sensor Layout tab.     To use the caliper, select Irregular shape.

4. Turn on the caliper and click the Start Bt     Caliper or Start button.

5. Measure the distances between the sensor pairs by     following the instructions played through the speakers of the PC. Once all     the points are registered, the shape of the trunk is shown on the screen

6. The caliper turns off automatically after 60 seconds     of the last data transmission